Amtrol hydronic expansion tanks are for use in closed, non-potable hydronic heating and chilled water systems. Available in diaphragm, full acceptance and partial acceptance bladder designs, all Extrol expansion tanks are made in the USA at our ISO 9001: 2008 registered facilities. ASME tanks meet all Section VIII, Division I standards.
| Brand | Amtrol-Worthington |
|---|---|
| Product Type | Head and Shell |
| Tank Capacity | 33.6GAL |
| Pressure | 125-300PSIG |
| Inlet/Outlet Connection | 1/2IN FNPT |
| Part Number | AX-60V |
| Standard | ASME |
| Precharge Pressure | 12PSIG |
| Temperature | 240DEG F |
| Diaphragm Material | Heavy Duty Butyl/EPDM |
| Material | Steel |
| Application | Closed, Non-Potable Hydronic Heating and Chilled Water Systems |
| Length | 16IN |
| Width | 16IN |
| Height | 45IN |
| Shipping Weight | 116.000 LBS |
| California Residents | WARNING: Click here for Proposition 65 information. |
|---|
Ships directly to your store or location
Ships directly to your store or location
Ships directly to your store or location
Ships directly to your store or location
Ships directly to your store or location
Ships directly to your store or location
Ships directly to your store or location
Ships directly to your store or location
Ships directly to your store or location
Ships directly to your store or location
Ships directly to your store or location
Ships directly to your store or location
Ships directly to your store or location
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. www.P65Warnings.ca.gov.
