Power-Vee Fits Tight or Awkward Spaces
The Power-Vee drain cleaning machine with automatic feed has a miniaturized version of the big machine power cable feed attached to the Super-Vee, which provides feeding speed and convenience in a hand-held power drain cleaner. To feed the cable, start the Power-Vee and squeeze the feed lever. To retract it, reverse the motor and squeeze the lever. The feed handles 1/4", 5/16", and 3/8" cables without any adjustment, disassembly, or additional parts.
Quick-Change Cable Cartridges simplify switching to different diameter drain cables. Loosen three screws, pull off the front of the drum, and load another cartridge. Changing takes less than a minute and turns a messy job into a clean one. The machine holds 50 ft. of 1/4" or 5/16" or 35 ft. of 3/8" Flexicore cables.
The Power-Vee also comes with the new Band-It splashguard to minimize excess water spray from the spinning drum.
The Dyna-Thrust bearing system helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the tool's life. Also adding to the Power-Vee's durability is the heavy-gauge stamped aluminum drum. Of course, the cables are Flexicore - with an integral wire rope center.
- For sinks, tubs, and laundry drains
- Power cable feed drives and retracts cable at up to 16' per minute
- Feed handles 1/4", 5/16", and 3/8" cables with no adjustments or parts required
- Quick-change cartridge makes switching cables clean and easy
- Unique Dyna-Thrust bearing system for longer tool life
- Band-It splashguard minimizes excess water spray from the spinning drum
- Holds 50' of 1/4" or 5/16", or 35' of 3/8" Flexicore cable
- Flexicore wire rope center cables have unequalled strength, yet the right amount of flexibility
Ships directly to your store or location
